Tech: Difference between revisions
No edit summary |
(→Changes between games: There is hitstun canceling, it's just not as profound) |
||
Line 40: | Line 40: | ||
In ''[[Smash 64]]'', only ground techs are available (standing and rolling), so on stages with many walls it can be difficult to avoid bouncing combos. ''[[Melee]]'' provides the addition of wall techs, wall jump techs, and ceiling techs, while ''[[Brawl]]'' removed the ability to ledge tech, as well as buffering a tech before one even received a hit. However, as the new [[air dodge]] physics in ''Brawl'' allow airdodges to be used while tumbling, trying to tech too early will simply result in an air dodge. As a result, teching requires more precision to perform in ''Brawl''. | In ''[[Smash 64]]'', only ground techs are available (standing and rolling), so on stages with many walls it can be difficult to avoid bouncing combos. ''[[Melee]]'' provides the addition of wall techs, wall jump techs, and ceiling techs, while ''[[Brawl]]'' removed the ability to ledge tech, as well as buffering a tech before one even received a hit. However, as the new [[air dodge]] physics in ''Brawl'' allow airdodges to be used while tumbling, trying to tech too early will simply result in an air dodge. As a result, teching requires more precision to perform in ''Brawl''. | ||
''[[Smash 4]]'' retains ''Brawl''{{'}}s tech physics | ''[[Smash 4]]'' retains ''Brawl''{{'}}s tech physics. However, the technique's physics have also gone through a major change: techs can no longer be inputted or buffered during [[hitlag]]. In addition, hitlag now overlaps with the lag suffered by the character when it gets stuck to a wall while hitting it, meaning it happens at the same time, which makes the hit untechable. In the case the hitlag would have ended before the character's recoil lag ends, the hitlag and recoil lag synchronize, meaning the character would have no time left to tech, and still rendering the hit untechable. [[Meteor smash]]es that land on grounded opponents are now techable in ''Smash 4'' however, with {{SSB4|Ganondorf}}'s down aerial being the exception due to the fact that techs cannot be inputted during hitlag (this was also the case for Falco's down aerial pre-patch [[1.0.8]]). | ||
==Usefulness and application== | ==Usefulness and application== |
Revision as of 07:06, November 1, 2016
- This article is about the action that can be performed while tumbling. for other uses see Technical skill
A tech, officially referred to as a breakfall in Super Smash Bros., an ukemi (受け身) in Super Smash Bros. Brawl, breaking your fall in Smash 4, and passive internally in Melee and Brawl, is an action that can be performed when the player's character hits the ground, a wall, or a ceiling while tumbling or in hitstun. To tech, the user must press the shield button 20 frames or fewer before hitting the surface; after that, a player won't be able to tech for 40 frames. Additional button or control stick input can cause different types of techs.
The word "ukemi" refers to a rolling technique used in Japanese martial arts when taking an attack. The name has found its way into several (mostly fighting) games, such as the Soul series, to describe similar fall recovery moves.
The word "tech" is borrowed from the competitive communities of other fighting games and traces its origin back to technical bonuses awarded in Capcom games for performing special maneuvers to escape grab attacks and get much less damage and more recovery time.
Types of techs
![](https://ssb.wiki.gallery/images/thumb/9/9b/SSBM_Amsah_Tech.gif/200px-SSBM_Amsah_Tech.gif)
![](https://ssb.wiki.gallery/images/thumb/0/03/Wall_Tech_Fox_SSBM.png/200px-Wall_Tech_Fox_SSBM.png)
![](https://ssb.wiki.gallery/images/thumb/2/28/Ceilingtech.jpg/200px-Ceilingtech.jpg)
Standard tech
A standing tech, standard tech, or neutral tech is a neutral, ground-based tech performed by pressing a shield button when a tumbling character comes in contact with the floor. The character will experience a brief period of invincibility, and will quickly bounce from the ground into a standing animation. The player will grab any items that he or she comes in contact with. This is the easiest tech to do, and is commonly done, even by casual players.
Rolling tech
A rolling tech (or PassiveStandF and PassiveStandB, depending on the direction chosen), also called a techroll, is a ground-based tech performed by tilting the control stick left or right when teching. The character will bounce from the ground into a roll-like animation during which the character moves left or right while invincible. This can allow characters to roll away from their impact point to complicate tech chasing, but rolling against an edge will halt the roll's sideways movement.
An Amsah tech (named after Dutch player Amsah) is the combination of a rolling tech and directional influence in Melee that can be used to survive low knockback-angle attacks like Falco's down smash. It is performed by DIing down and towards the attacking character, holding the C-Stick down for ASDI, and pressing L or R during hitlag. It is also referred to as an Over tech, named after Spanish player Overtriforce.
Wall tech
A wall tech (or PassiveWall) is a tech against a wall. To wall tech, the player must press a shield button 20 frames or fewer before hitting the wall while tumbling, reeling, or in hitstun. 20 frames after each press is a 40 frame downtime window where a wall tech cannot be done, so button mashing reduces the player's likelihood of teching. As with normal techs, the wall teching character experiences a few invincibility frames, and the tech absorbs the player's momentum.
Ledge tech
A recovering character can use a form of wall tech to survive an edge-guarder. If the recovering character is hit with an attack very near to the ledge, he or she can smash DI towards the ledge and wall tech to absorb all the knockback of the enemy's attack. This is usually performed by pressing the shield button to wall tech before pressing the control stick to DI, because of the 20 frame window in which the player can input the tech before hitting the wall.
Wall tech jump/Wall jump tech
If a jump input is active when a wall tech is performed (such as holding Up or pressing a jump button), then the teching character will wall jump. This is known as a wall tech jump. Every character can wall tech jump, even those who cannot wall jump normally. A skilled player can survive a meteor smash (such as the Ice Climbers' forward aerial that often ends their chaingrabs) by wall tech jumping.
Ceiling tech
A ceiling tech (or PassiveCeil) is a tech against a ceiling. To ceiling tech, the player must press the shield button 20 frames or fewer before hitting the ceiling, while in hitstun. 20 frames after each press is a 40 frame downtime window where a ceiling tech cannot be done, so mashing buttons reduces the player's likelihood of teching. As with normal techs, the ceiling teching character experiences a few invincibility frames, and the tech absorbs most of the momentum. It is shown on the Super Smash Bros. Brawl tutorial video on the Nintendo Channel that it can even save a character at 999%. There are few situations where there is a ceiling for a player to tech off of, but it can happen quite frequently in the caves of life in some stages.
Changes between games
In Smash 64, only ground techs are available (standing and rolling), so on stages with many walls it can be difficult to avoid bouncing combos. Melee provides the addition of wall techs, wall jump techs, and ceiling techs, while Brawl removed the ability to ledge tech, as well as buffering a tech before one even received a hit. However, as the new air dodge physics in Brawl allow airdodges to be used while tumbling, trying to tech too early will simply result in an air dodge. As a result, teching requires more precision to perform in Brawl.
Smash 4 retains Brawl's tech physics. However, the technique's physics have also gone through a major change: techs can no longer be inputted or buffered during hitlag. In addition, hitlag now overlaps with the lag suffered by the character when it gets stuck to a wall while hitting it, meaning it happens at the same time, which makes the hit untechable. In the case the hitlag would have ended before the character's recoil lag ends, the hitlag and recoil lag synchronize, meaning the character would have no time left to tech, and still rendering the hit untechable. Meteor smashes that land on grounded opponents are now techable in Smash 4 however, with Ganondorf's down aerial being the exception due to the fact that techs cannot be inputted during hitlag (this was also the case for Falco's down aerial pre-patch 1.0.8).
Usefulness and application
Teching can be a lifesaver in many situations and is a good technique for beginners to learn and practice. Teching can also help the user escape from combos.
Occasionally after accumulating sufficient damage, one will experience a wall or ceiling rebound that will send the player plummeting off-stage. This can be prevented by applying a wall or ceiling tech, saving the player from a deadly ricochet. This is especially useful in caves of life, e.g. Temple: a character in the large lower section of the stage can survive to very high damage and can immediately retaliate from otherwise-deadly blows. This unusual longevity is one reason Temple and similar stages are banned from tournaments.
The standing and rolling techs can be performed in more situations, such as allowing a character to avoid continued assault after being knocked back. However, an opponent can frequently predict a player's tech patterns and strike him or her again after knocking him or her down; deliberately setting up such situations is known as "tech-chasing".
Edge-teching helps keep the character on the stage, or at least making it possible to recover to the stage.
Gallery
Yoshi performing a tech in Brawl.
Captain Falcon performing a tech in Smash 64.
Ganondorf performing a wall jump tech, and counterattacking with a forward aerial.